Self‐assembly of poly(ionic liquid) functionalized mesoporous magnetic microspheres for the solid‐phase extraction of preservatives from milk samples

In this work, a novel, rapid, and simple analytical method was proposed for the detection of parabens in milk sample by gas chromatography coupled with mass spectrometry. At the same time, milk sample was pretreated by magnetic solid phase extraction, which detected up to five parabens. A series of important parameters of magnetic solid phase extraction were investigated and optimized, such as pH value of loading buffer, amount of material, adsorption time, ionic strength, eluting solvents, and eluting time. Under the optimized conditions, the corresponding values were more than 0.9991, limits of detection and the limit of quantification were 0.1 and 0.5 ng/mL, respectively. In addition, the recoveries were achieved in range of 95–105%, the liner range were within 0.1–600 ng/mL, and the relative standard deviations were even lower than 5%.     

Rapid measurements of curcumin from complex samples coupled with magnetic biocompatibility molecularly imprinted polymer using electrochemical detection

Curcumin widely exists in food, and rapid selective and accurate detection of curcumin have great significance in chemical industry. In this experiment, a new magnetic biocompatibility molecularly imprinted polymer was prepared with nontoxic and biocompatible Zein to adsorb curcumin selectively. The polymer has high biocompatibility, good adsorption capacity, and specific adsorption for curcumin. Combined with portable electrochemical workstations, the polymer can be used to detect curcumin rapidly and cost‐effectively. Using curcumin as a template and Zein as the crosslinking agent, the polymers were synthesized on the surface of Fe₃O₄ particles for solid phase extraction. The experimental results showed that the polymer reached large adsorption capacity (32.12 mg/g) with fast kinetics (20 min). The adsorption characteristic of the polymer followed the Langmuir isotherm and pseudo‐second‐order kinetic models. Hexacyanoferrate was used as electrochemical probe to generate signals, and the linear range was 5–200 µg/mL for measuring curcumin. The experimental analysis showed that the polymer was an ideal material for selective accumulation of curcumin from complex samples. This approach has been successfully applied to the determination of curcumin in food samples with electrochemical detection, indicating that this is a feasible and practical technique.     

Trace determination of parabens in cosmetics and personal care products using fabric‐phase sorptive extraction and high‐performance liquid chromatography with UV detection

A simple, fast, and sensitive analytical protocol using fabric‐phase sorptive extraction followed by high performance liquid chromatography with ultraviolet detection has been developed and validated for the extraction of five parabens including methylparaben, ethylparaben, propylparaben, butylparaben, and benzylparaben. In the present work, sol‐gel polyethylene glycol coated fabric‐phase sorptive extraction membrane is used for the preconcentration of parabens (polar) from complex matrices. The use of fabric‐phase sorptive extraction membrane provides a high surface area which offers high sorbent loading, shortened equilibrium time, and overall decrease in the sample preparation time. Various factors affecting the performance of fabric‐phase sorptive extraction, including extraction time, eluting solvent, elution time, and pH of the sample matrix, were optimized. Separation was performed using a mobile phase consisting of water:acetonitrile (63:37; v/v) at an isocratic elution mode at a flow rate of 0.9 mL/min with wavelength at 254 nm. The calibration curves of the target analytes were prepared with good correlation coefficient values (r² > 0.9955). The limit of detection values range from 0.252 to 0.580 ng/mL. Finally, the method was successfully applied to various cosmetics and personal care product samples such as rose water, deodorant, hair serum, and cream with extraction recoveries ranged between 88 and 122% with relative standard deviation <5%.     

In‐situ preparation of porous monolithic polymer inside hollow fiber as a micro‐solid phase extraction device for glucocorticoids in cosmetics

Glucocorticoids have a certain whitening effect on the skin. However, frequent and long‐term use of cosmetics including glucocorticoids is harmful to health. Herein, we proposed a novel micro‐solid phase extraction method for the detection of prednisolone acetate, prednisone, and prednisolone in cosmetics coupled with high‐performance liquid chromatography. In this method, porous monolithic polymer micro‐extraction bars were prepared by “one‐step, one‐pot” in situ photopolymerization combined with sacrificial support in hollow fiber under water atmosphere. The crucial factors such as pH of sample solution, extraction, and elution times that influence micro‐extraction were optimized and found to be 9.0, 2 h, and 32 min, respectively. Under the optimum experimental conditions, the linear range of the calibration curves were from 5.0 to 2000 µg/L with correlation coefficients (R²) between 0.9922 and 0.9996. The limit of detection and limit of quantification were 1.5 µg/L and 5.0 µg/L, respectively, and the recoveries were found to be in range of 69.0–113.3%. The analysis of precision for intraday and interday were less than 10.40 and 10.59%. The device has been successfully achieved photopolymerization under water atmosphere. The results indicated that this method is simple, accurate, and satisfactory for the pretreatment and determination of glucocorticoids in complex cosmetics samples.     

Determination of personal care products in water using UHPLC–MS after solid phase extraction with mesoporous silica‐based MCM‐41 functionalized with cyanopropyl groups

A silica‐based MCM‐41 mesoporous material functionalized with cyanopropyl groups has been synthesized by cocondensation, characterized and applied to preconcentrate six parabens and three UV filters in river and swimming‐pool waters. The analytes were quantified by ultra‐high performance liquid chromatography‐tandem mass spectrometry, according to the Directive 96/23/EC. Even though matrix effect was negligible, quantification in river water samples with the standard addition approach improved the recoveries obtained using solvent‐based and even with matrix‐matched calibration. The method quantification limits in river water samples were 0.05 ng/mL for 2,4‐dihydroxybenzophenone and 0.01 ng/mL for the rest. Recoveries, evaluated for a concentration level of 0.5 ng/L, were in the range 93.5‐107.6% for parabens and in the range 64.2‐85.8% for UV filters, with relative standard deviations intraday ≤10.2 and 10.8%, respectively. This parameter, evaluated for a concentration level of 0.1 ng/L, ranged between 98.3 and 110.4% for parabens and between 61.9 and 89.9% for UV filters, with relative standard deviation intraday ≤15.3 and 15.5%, respectively. The two UV filters with lower recoveries were the most affected by the addition of sodium chloride. River and swimming pool waters were analyzed and all the personal care products were found in the swimming pool water, whereas only methylparaben was detected in the river water.     

Solid‐phase extraction using chloropropyl functionalized sol–gel hybrid sorbent for simultaneous determination of organophosphorus pesticides in selected fruit samples

A new sol–gel hybrid methyltrimethoxysilane‐chloropropyltriethoxysilane was prepared as sorbent for solid‐phase extraction. The extraction efficiency of the prepared sol–gel hybrid methyltrimethoxysilane‐chloropropyltriethoxysilane was assessed by using three selected organophosphorus pesticides, namely, chlorpyrifos, profenofos, and malathion. Gas chromatography–mass spectrometry was used for detection of organophosphorus pesticides. Several vital parameters were optimized to identify the best extraction conditions. Under the optimum extraction conditions, solid‐phase extraction‐methyltrimethoxysilane‐chloropropyltriethoxysilane method showed good linearity range (0.05‐1 μg/mL) with coefficient of determination more than 0.995. The limits of detection obtained were in the range of 0.01–0.07 μg/mL and limits of quantification ranging from 0.03 to 0.21 μg/mL. The limits of detection obtained for the developed method were 2.3–6.5× lower than the limits of detection of commercial octadecyl silica sorbent. Real samples analysis was carried out by applying the developed method on red apple and purple grape samples. The developed method exhibited good recoveries (88.33–120.7%) with low relative standard deviations ranging from 1.6 to 3.3% compared to commercial octadecyl silica sorbent, which showed acceptable recoveries (70.3–100.2%) and relative standard deviations (6.3–8.8%). The solid‐phase extraction‐methyltrimethoxysilane‐chloropropyltriethoxysilane method is presented as an alternative extraction method for determination of organophosphorus pesticides.     

Determination of sulfadimethoxine in milk with aptamer‐functionalized Fe3O4/graphene oxide as magnetic solid‐phase extraction adsorbent prior to HPLC

An aptamer (Apt) functionalized magnetic material was prepared by covalently link Apt to Fe₃O₄/graphene oxide (Fe₃O₄/GO) composite by 1‐ethyl‐3‐(3‐dimethylaminopropyl) carbodiimide hydrochloride and N‐hydroxysuccinimide, and then characterized by FTIR spectroscopy, X‐ray diffraction, and vibration sample magnetometry. The obtained composite of Fe₃O₄/GO/Apt was employed as magnetic solid‐phase extraction adsorbent for the selective preconcentration of sulfadimethoxine prior to analysis by high‐performance liquid chromatography. Under the optimal conditions (sample pH of 4.0, sorbent dosage of 20 mg, extraction time of 3 h, and methanol‐5% acetic acid solution as eluent), a good linear relationship was obtained between the peak area and concentration of sulfadimethoxine in the range of 5.0 to 1500.0 µg/L with correlation coefficient of 0.9997. The limit of detection (S/N = 3) was 3.3 µg/L. The developed method was successfully applied to the analysis of sulfadimethoxine in milk with recoveries in the range of 75.9‐92.3% and relative standard deviations less than 8.1%. The adsorption mechanism of Fe₃O₄/GO/Apt toward sulfadimethoxine was studied through the adsorption kinetics and adsorption isotherms, and the results show that the adsorption process fits well with the pseudo‐second‐order kinetic model and the adsorbate on Fe₃O₄/GO/Apt is multilayer and heterogeneous.     

Single‐Mode Microwave Heating‐Induced Concurrent Out‐of‐Plane Twin Growth Suppression and In‐Plane Epitaxial Growth Promotion of b‐Oriented MFI Film under Mild Reaction Conditions

In this study, single‐mode microwave heating was applied in epitaxial growth of b‐oriented MFI seed monolayer prepared by facile manual assembly, resulting in the formation of well‐intergrown and highly b‐oriented MFI film with few twins. It exhibited a precise molecular sieving property at a reaction temperature no higher than 100 °C within 2 hours, therefore making it possible for easy operation in an open environment. The capability for concurrent suppression of undesired out‐of‐plane twin growth and promotion of in‐plane epitaxial growth rate under mild reaction conditions was attributed to the obvious superiority of single‐mode microwave heating in comparison with conventional multi‐mode microwave heating in aspects of microwave field uniformity and intensity. Our research indicated that the single‐mode microwave heating technique could potentially be a useful tool for improving the microstructure and therefore the performance of diverse zeolite films.     

Conventional and ultrasound-assisted methods for extraction of bioactive compounds from red araçá peel (Psidium cattleianum Sabine)

The present study aimed to maximize the conventional extraction and compare it with the ultrasound-assisted method for extracting bioactive compounds obtained from the red araçá peel. The behavior of anthocyanins related to the pre-treatment of the vegetal matrix, employed solvent, extraction kinetics of both methods, the levels of total phenolic compounds, flavonoids and carotenoids, as well as the antioxidant activity were evaluated. The ultrasound-assisted extraction (40 KHz −154 W and 90 min) had an increase of 12% in the levels of anthocyanins (121.85 Eq. mg of cyanidin-3-glycoside/100 g of peel) and a 25% reduction in time extraction compared to conventional extraction by maceration (116.81 Eq. mg of cyanidin-3-glycoside/100 g of peel) using 90% ethanol, for 2 h, pH 1.5, at 40 °C and mass/volume ratio 1 g/10 mL). Analyses of the total phenolic compounds, flavonoids and carotenoids presented promising results for the ultrasound-assisted and conventional extractions, respectively. Analyzes of total phenolic compounds, flavonoids and carotenoids, show promising results for ultrasound-assisted extractions, respectively, indicating that red araçá is rich in bioactive compounds beneficial to human health, in addition to being considered natural pigments that can be used in food.     

Linked drug-drug conjugates based on triterpene and phenol structures. Rational synthesis,molecular properties,toxicity and bioactivity prediction

One of the tasks of modern medicinal chemistry is to produce new molecules that have interesting and desired biological effects. In addition, the synthetic procedure for obtaining these compounds should be at least partially smart and rational e.g. “Lego” and green approaches. The study focuses on the synthesis of several hybrid type compounds that are expected to be characterized by beneficial bioactivities. In order to hybridize natural triterpene oleanolic acid and phenol structures, the linker-mode concept was selected. The synthetic goal was achieved in two stages. The first concerns the rapid introduction of the halogenoacidic linker to active phenols selected as a result of microwave-ultrasonic (MW-US) assisted O-alkylation with the use of 2-halogenoacetic acid. The next stage of the synthetic studies involves the reaction of phenoxyacetic acid derivatives obtained containing an active carboxylic group with oleanolic acid/oxime units by the methods typical of triterpene chemistry. Novel linked ester- and iminoester-type triterpene derivatives with phenols (thymol, eugenol, paracetamol, nipagins, naphthols, curcumin and genistein) were obtained and characterized. Additionally, based on the analysis of numerous references and selected methods of computational chemistry (Molinspiration Cheminformatics, Osiris Property Explorer and PASS method) the molecular parameters and the preliminary anti-inflammatory and antinociceptive activity characterising these molecules as potential drugs were calculated and predicted.